Original-Carparts.com

Genuine BMW parts from Germany for workshops and parts dealers

Workshops, parts dealers and fleets buy genuine BMW parts here at wholesale or as single items from our warehouse in Germany. A BMW repair estimate needs a part reference that the workshop can stand behind. Model names help describe the vehicle, but a purchase decision also depends on its generation, engine, drivetrain and equipment. When you buy original BMW parts from Germany, start with the OE number from the old part or the manufacturer's documents and confirm it before approving the order.

We work with business buyers who need clear buying records: workshops, parts dealers, fleets and resellers. Your order can serve a particular repair or a planned stock requirement. Collection takes place at our warehouse in Germany, either by your company or by your own forwarder. Register as a business for business orders, or Find a part by number if the reference is already known.

Build the requirement around the repair

Engine service, cooling and sealing

For engine work, distinguish the diagnosed component from everything needed to complete the repair. A cooling-system job may involve a pump, connections, seals or related control components, each with its own application. A filter description alone is insufficient when engines differ within the model range. Check the engine variant and the relevant service reference rather than carrying a previous workshop purchase into a different vehicle's job sheet.

Braking, steering and chassis parts

BMW suspension and braking requirements can vary with equipment and drivetrain. Establish which assembly the vehicle uses before ordering discs, pads, arms, bearings or steering components. Keep the fitting position explicit in the order list. If the repair concerns electronically controlled chassis equipment, confirm the workshop's installation and adaptation requirements separately from the purchase of the physical part.

Drivetrain and transmission-related components

The same model family can contain different drivetrain arrangements. Transmission-related items, shafts, mounting components and associated seals require the correct vehicle application. A workshop should identify the service scope it needs: an individual component is not interchangeable with a complete assembly simply because both appear under the same catalog heading. Check which separately referenced items the repair procedure calls for.

Lighting, bodywork and electronic equipment

Lamps, mirrors, trim and body components can differ between body styles and model revisions. Electrical modules and interior controls also depend on equipment. Before ordering an electronic part, establish whether coding, programming or another workshop procedure is required. An original reference identifies what is being purchased; it does not diagnose an electrical fault or complete the installation work.

Models and generations: identify the actual vehicle

A BMW 3 Series or 5 Series description narrows the discussion but leaves generation and specification unresolved. The same applies across the X family, where a familiar model name can cover substantially different vehicles. Coupé, saloon, estate and other body variants need their own catalog application checks. Record the model information with the OE number so the team preparing the order works from the same reference.

Generation identifiers such as E90, F30 and G20 help distinguish BMW 3 Series applications. They are useful catalog context, not a guarantee that parts interchange within or between those generations. Use the exact vehicle record to resolve the reference.

Treat M models and M equipment descriptions carefully. An appearance package is not a general parts interchangeability rule, and a sporty exterior does not establish the braking or chassis specification. For electric and plug-in hybrid vehicles, separate ordinary maintenance and body requirements from work involving the high-voltage system. The workshop must define the repair and the appropriate technical procedures before an order list is approved.

Who buys BMW parts through a company account?

Independent workshops and specialist repairers. A specialist needs the right original component for a diagnosed job, an understandable company price and a record of any reference replacement. Keep your repair order reference beside the OE number. For a larger job, Excel import can help prepare the list, but the technician or person placing the order should review each line before confirmation.

Parts shops and dealers. Buying original BMW parts wholesale starts with actual customer demand and a controlled stock list. Distinguish a customer's requested number from the number eventually ordered. Check return rules before accepting an uncertain customer request, and keep accounting documents attached to the correct commercial transaction. Do not treat a catalog illustration as a complete statement of what a sale includes.

Fleets and taxi businesses. Link each requirement to a fleet vehicle rather than assuming the same reference suits every BMW in service. Equipment differences can matter even where the model names match. Recurring order lists should be checked when vehicles or maintenance requirements change. A clear receiving record helps the workshop allocate the purchased parts to the intended vehicle.

Importers and local resellers. If you source BMW parts from Germany for customers in your country, maintain traceability from their inquiry to your order. API access may help a recurring buying process; check available functions and account access before relying on an integration. Plan collection with your own forwarder and establish the documents your accounting and transport processes need.

Private buyers remain secondary to our business focus. A private requirement still needs an exact reference and a completed application check; the vehicle name alone is not enough to order safely.

Find the part by OE number

If a repairer has supplied an original BMW number, search it accurately and compare the resulting description with the repair requirement. A marking on an old component may identify a subcomponent or an earlier reference rather than the complete service item. Resolve uncertainty before ordering instead of choosing the nearest-looking result. Preserve the source reference in your workshop or customer record.

If no number is known yet, the workshop can read it from the removed part, its own repair documents or the manufacturer's information. Search our catalog by that number and add the component and fitting position to the inquiry. A number from the old part does not reflect every conversion or replacement assembly fitted during the vehicle's life. If the component in the car conflicts with the search result, ask the repairer to clarify the actual configuration.

Original parts and aftermarket alternatives

Original BMW parts and aftermarket products are different buying categories. A cross-reference can support research, but it does not change a product's identity or establish suitability by itself. Where your customer's estimate specifies an original part, keep that specification visible in the inquiry and order approval. Do not substitute an alternative silently because its description sounds similar.

Original does not mean universal. Even a correctly identified original component needs the right vehicle application and scope of supply. Check whether the purchase is for a complete unit, a repair component or an accessory to the assembly. This distinction helps prevent an accurate part number from being used for an incomplete repair plan.

Replaced numbers and commercial approval

BMW may replace an older service reference with a newer one. Check the proposed supersession rather than assuming the new number represents an identical package. A replacement can affect related components or the scope the workshop needs to review. Keep both the requested and current reference in your records so the purchase remains understandable after the repair is closed.

Before confirming a company order, review the quantities, company price, business details and applicable payment arrangements. Resolve a changed line with the person responsible for the customer's repair estimate. Accurate company information also supports the accounting documents; do not leave the intended invoice recipient to be inferred from a collection contact.

Collection and returns

You or your appointed forwarder collect from our warehouse in Germany. If the parts will continue from Germany to Ireland, for example, that onward movement is arranged by your business. Coordinate collection against the actual order, advise us of the arrangements and ensure the person collecting can identify the order and customer. Check the goods against the accompanying documentation at handover.

Returns follow our rules. Read those rules before ordering, retain the order information and follow the stated procedure if an item needs assessment. Do not assume that a wrong selection, installation attempt or opened package creates an automatic right to return. Document a discrepancy clearly and contact the store through the applicable process before sending goods back.

Register as a business to organize business orders. Find a part by number to check a concrete BMW requirement.

BMW Motorrad

Genuine BMW Motorrad parts for motorcycle repairs

Genuine Car Parts from Germany – Wholesale for Workshops

Genuine car parts from Germany for workshops and dealers

Countries

Argentina, Brazil, Bulgaria, Canada, Chile, China, Croatia, Czechia, Denmark, Ecuador, Estonia, Finland, France, Germany, Greece, Hungary, Italy, Japan, Latvia, Lithuania, Mexico, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, South Korea, Spain, Sweden, Türkiye, Ukraine, United States, Vietnam.

FAQ

Can an independent workshop buy original BMW parts?

Yes. Prepare the OE references and vehicle information, register your business and review the commercial conditions applicable to your order.

Is the BMW model name sufficient for ordering?

No. Generation, body style, engine, drivetrain and equipment can change the relevant reference. Use the specific vehicle application rather than the model name alone.

How do I find the right BMW OE number?

Check the old part, the workshop's documents or the manufacturer's information, then search our catalog by that number. Define which component you need and clarify any conflict between the result and the vehicle's actual configuration.

What if the number on the old part is unclear?

Do not guess missing characters. Check the vehicle application and establish whether the visible marking identifies the complete service item or only a component.

Are original and aftermarket parts the same category?

No. Keep the product category specified by your repair estimate. A cross-reference is research information rather than proof that an alternative is an original part.

Can I buy parts for BMW M models?

Search the required original reference and check the actual application. M appearance equipment does not establish that a vehicle uses the same parts as an M model.

What happens when an OE number has changed?

Review the proposed replacement and any related requirements. Keep the old and current reference linked and approve the commercial line on that basis.

Can I upload a workshop list from Excel?

Excel import can help prepare a larger list. Review numbers, quantities and vehicle allocation after import; file acceptance does not confirm technical fit.

Is an API suitable for repeat buying?

Check account access, functions and your integration requirements. Build a process that flags unresolved references and replacements rather than treating every response as purchase approval.

Can my forwarder collect the order?

Yes. Collection is from our warehouse in Germany. Coordinate the handover and ensure your forwarder has the customer and order information needed for identification.

Which payment conditions apply to companies?

Review the business terms applicable to your order before confirming it. Keep the buying approval and accounting details consistent with the commercial documents.

Can I return an incorrectly selected BMW part?

A return request is subject to our rules and assessment. Read the procedure before ordering and follow it if you need to raise a case.

Countries

Contact

Address
Universitätsstraße 60, 44789 Bochum, Germany
Office / head office – no handover of goods, no loading or unloading.
Phone
+49 234 917 89 990
Fax
+49 234 917 89 991
E-mail
info@original-carparts.com